Isfahan, Chaharbagh Bala, Kavian Alley, No. 45

Tel: +98 -31- 36248019 Fx: +98 -31- 36240642

Email: export@marjantileco.com

No, it is better to use grout for the following reasons:
• There are slight differences in dimensions between tiles, which are calibrated by using grout.
• If tiles are not grouted, the stresses from contraction and expansion of the structure can cause tiles to protrude and edges to chip.
• In cases where grouting is not done, there is a possibility of water penetration or contamination between the tiles underneath them.

Yes, if we observe a few points such as the same thickness of the tile and the use of proper strapping and taking into account the compatibility of the dimensions of the tiles with each other, we can use tiles of different sizes on the same surface.

Can new tiles be installed over old tiles (without removing the previous ones)?

Yes, for this to be done, it is essential to ensure the firmness of the underlying tiles. The surface of the underlying tiles should be clean, a primer coat should be applied, and following the installation instructions of Marjan Tile Company, the surface can be tiled.

Generally, the size of spacers is recommended to be a minimum of 1 millimeter and a maximum of 10 millimeters based on the size of the tiles used (depending on preference)

No, nowadays with advancements in using colorants in tile adhesives, various colored spacers can be used in tiling based on customer preference.

• Cutting
It is important to choose the cutting method and use quality tools and how to apply gentle pressure and speed during cutting. Marjan Tile Company recommends the wet cutting method for cutting its tiles.
• Drilling
The type of tool, the diameter of the hole, and the surface on which the drilling is done are important factors. For drilling ceramic tiles, special diamond drills should be used, not conventional metal drills. It is also necessary that the tiles are placed on non-elastic surfaces without any holes, and water should be used during drilling.

Yes, you can access tile samples through Marjan Tile Company's sales agents.

For information on product prices, please contact Marjan Tile Company's sales agents.

By visiting the products and catalogs on the website or contacting Marjan Tile Company's sales agents.

You can purchase Marjan Tile's products through their sales agents

You can purchase Marjan Tile's products through their sales agents

no, orders are only processed through Marjan Tile Company's sales agents.

No, generally this cannot be done as differences in tile shades on any surface negatively affect the appearance of tiled surfaces; therefore, it is not recommended to use tiles with different shades together

No, if you pay attention to the same caliber of the products when installing the tiles, there will be no installation problem.

Yes, ceramic tiles produced by Marjan Tile Company are resistant to household cleaners and acids according to ISO standard 13-10545. Additionally, industrial tiles produced by Marjan Tile Company are resistant to chemical substances according to ISIRI3051, they are resistant to chemical substances except for hydrofluoric and its derivatives.

Yes, all products of this company are resistant to freezing; however, it is necessary to adhere to the relevant installation principles in the substructure and bonding.

Yes, tiles with high water absorption (more than 0.5%) are not recommended for all uses; these tiles are mostly used in indoor environments (floor and walls). In contrast, tiles with low water absorption (less than 0.5%) are suitable for all uses, including outdoor environments (floor and walls). Marjan Tile Company is proud to be able to meet the needs of all users for tiles and ceramics with tiles that have less than 0.5% water absorption.

Yes, various glazes are used in the production of tiles, and these glazes behave differently in terms of abrasion and slip resistance. In Marjan Tile Company, most products are made with glazes that have high resistance to abrasion, and different glaze models are used to prevent slipping.

No, the tile production process at Marjan Tile Company is free from toxic and harmful materials.

Raise your complaints regarding purchased products with the sales agent from whom you bought the tiles so that they can transfer it to Marjan Tile Company for investigation and feedback.

Contact Marjan Tile Company's CRM department at 0313-36281237.

Yes, if after inspection by the quality assurance unit of Marjan Tile Company, a product is found not to meet specified standards.

EN